The suggested supply list and measurements are below along with the video if you missed it.  As always, please let me know if you have any questions or would like to add any of the products I used to your crafting stash.  I would love to help you!

Stay Safe & Crafty!

Here is a list of suggested tools and supplies you need to get together before the party:

• A stamp set with small and medium stamps.  Coordinating dies and punches will be good, but are not required.
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored or a ruler and pencil
• Paper Trimmer
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 5 1/2″ x 8 1/2″
• Basic White or something neutral 4″ x 5 1/4″, 2 3/4″ x 2 3/4″ and a scrap

Designer Series Paper – these pieces can coordinate, or be the same.  Your finished card will be portrait, so keep this in mind if you are using directional DSP:

• 2 1/4″ x 2 1/4″
• 1 3/4″ x 4 1/4″
• 1″ x 4″
• 3/4″ x 3 1/2″

Scraps of cardstock and DSP for stamping, die cutting and punching etc…

Wow!  It is once again time for Mystery Stamping!  I know I always say this, but you are going to LOVE this month’s project!  It is SO easy, but doesn’t look that way!  Totally my kind of project!  As a bonus you don’t have to cut tiny little pieces of DSP and cardstock this month! Yay!

Check out the supply list and measurements below. Let me know if you have questions.  I look forward to “seeing” you on Wednesday night!

Stay Safe & Crafty!

Wednesday, May 20th at 7:00pm

This event will be virtual only, via Zoom.  Be sure to email me at tracie@stampwithtracie.com by 3:00pm on Wednesday, so I can add you to the Zoom email list.  You should receive the email with the link by 5:00pm.  If you do not receive it by then, please text or email me and I will make sure you get it!

Can’t join us on live on Wednesday night, but want to create this fun project?  No, problem!  Visit the Stamp Pad Facebook page or check my blog for the completed project and link to my YouTube channel Thursday afternoon.

Please join me on the Zoom link starting at 6:45pm to chat or ask any questions you may have.  We will begin promptly at 7:00pm. Please remember to keep chatting to a minimum, unless you have a question about the project.  We will have time to chat and ask any non-project questions after we finish.

Here is the scoop on how our Mystery Stamping Parties work. – You will need to gather your supplies and cut your cardstock before the party. There is a list of supplies (some are suggested, so don’t worry if you don’t have everything) and cardstock dimensions below.

During the party I will give you step-by-step directions to make your card along with some tips and tricks. We will NOT share anything about our projects until the very end.

PLEASE note that that I might practice a fancy fold to make sure I understand how it works, but I DO NOT create the full project until I do it with you.  So, it is always a mystery how it will all turn out for me, just like it is for you!

It is always so much fun to see how everyone interprets the directions and with everyone using different stamps, cardstock, DSP, etc.., everyone’s card will be a one of a kind!

Please note that you CAN use anything you have in regards to stamp sets, punches, cardstock, DSP or embellishments. It can be retired if you have something you like and want to use.

Hint, if this is your first time joining us, you might consider prepping two sets of cardstock and DSP.  We lovingly call this “Pulling an Allison.” This ensures that if something goes wrong or you decide  you don’t like how something goes together you can easily fix it.

Here is a list of suggested tools and supplies you need to get together before the party:

• A stamp set with small and medium stamps.  Coordinating dies and punches will be good, but are not required.
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored or a ruler and pencil
• Paper Trimmer
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 5 1/2″ x 8 1/2″
• Basic White or something neutral 4″ x 5 1/4″, 2 3/4″ x 2 3/4″ and a scrap

Designer Series Paper – these pieces can coordinate, or be the same.  Your finished card will be portrait, so keep this in mind if you are using directional DSP:

• 2 1/4″ x 2 1/4″
• 1 3/4″ x 4 1/4″
• 1″ x 4″
• 3/4″ x 3 1/2″

Scraps of cardstock and DSP for stamping, die cutting and punching etc…

Here is a list of suggested tools and supplies you need to get together before the party:

• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• A stamp set that coordinates with your DSP
• An Embossing Folder
• Simply Scored or a ruler and pencil
• Paper Trimmer or Snips
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 5 1/2″ x 8 1/2″
• 3 1/4 x 3 1/4

Basic White or Neutral Cardstock:

• 3″ x 3″
• 4 @ 3/4″ x 3/4″
• 4″ x 5 1/4″ for the inside of the card if you the cardbase isn’t light enough to write on.

Designer Series Paper

• 2″ x 5 1/4″ – this piece can be a banner, rectangle or other die cut shape if you wish.  Just keep the length and width close to the same size
• 4 @ 1/2″ 6″ –  these should coordinate, but not be the same

Scraps of cardstock and DSP for stamping, die cutting and punching.

Check out this month’s video now!

Please let me know if you have questions or would like to add any of the products I used to your stamping stash.  I would love to help you!

Stay Safe & Crafty!

Check out the supply list and measurements below. Let me know if you have questions.  I look forward to “seeing” you on Wednesday night!

Stay Safe & Crafty!

Wednesday, April 29th at 7:00pm

This event will be virtual only, via Zoom.  Be sure to email me at tracie@stampwithtracie.com by 3:00pm on Wednesday, so I can add you to the Zoom email list.  You should receive the email with the link by 5:00pm.  If you do not receive it by then, please text or email me and I will make sure you get it!

Can’t join us on live on Wednesday night, but want to create this fun project?  No, problem!  Visit the Stamp Pad Facebook page or check my blog for the completed project and link to my YouTube channel Thursday afternoon.

Please join me on the Zoom link starting at 6:45pm to chat or ask any questions you may have.  We will begin promptly at 7:00pm. Please remember to keep chatting to a minimum, unless you have a question about the project.  We will have time to chat and ask any non-project questions after we finish.

Here is the scoop on how our Mystery Stamping Parties work. – You will need to gather your supplies and cut your cardstock before the party. There is a list of supplies (some are suggested, so don’t worry if you don’t have everything) and cardstock dimensions below.

During the party I will give you step-by-step directions to make your card along with some tips and tricks. We will NOT share anything about our projects until the very end.

PLEASE note that that I might practice a fancy fold to make sure I understand how it works, but I DO NOT create the full project until I do it with you.  So, it is always a mystery how it will all turn out for me, just like it is for you!

It is always so much fun to see how everyone interprets the directions and with everyone using different stamps, cardstock, DSP, etc.., everyone’s card will be a one of a kind!

Please note that you CAN use anything you have in regards to stamp sets, punches, cardstock, DSP or embellishments. It can be retired if you have something you like and want to use.

Hint, if this is your first time joining us, you might consider prepping two sets of cardstock and DSP.  We lovingly call this “Pulling an Allison.” This ensures that if something goes wrong or you decide  you don’t like how something goes together you can easily fix it.

Here is a list of suggested tools and supplies you need to get together before the party:

• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• A stamp set that coordinates with your DSP
• An Embossing Folder
• Simply Scored or a ruler and pencil
• Paper Trimmer or Snips
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 5 1/2″ x 8 1/2″
• 3 1/4 x 3 1/4

Basic White or Neutral Cardstock:

• 3″ x 3″
• 4 @ 3/4″ x 3/4″
• 4″ x 5 1/4″ for the inside of the card if you the cardbase isn’t light enough to write on.

Designer Series Paper

• 2″ x 5 1/4″ – this piece can be a banner, rectangle or other die cut shape if you wish.  Just keep the length and width close to the same size
• 4 @ 1/2″ 6″ –  these should coordinate, but not be the same

Scraps of cardstock and DSP for stamping, die cutting and punching.

Here is a list of suggested tools and supplies you need to get together before the party:

• An Embossing Folder
• Stamp set and dies or punches for decorating your card. Ephemera would work, too!  You may want just a little to add accents.  This project is more about the DSP. =-)
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored or a ruler and pencil
• Paper Trimmer or Snips
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 4 1/4″ x 5 1/2″
• 7 1/2″ x 5″ (this should be neutral or a light color that coordinates with your DSP)
• 3 3/4″ x 5 (this can be neutral or a color that coordinates with your DSP)

Designer Series Paper – these should all be the same pattern:

• 3/4″ x 4″
• 3/4″ x 2 3/4″
• 2 @ 3/4″ x 2

A coordinating DSP pattern:

• 2 @ 1 1/16″ x 1 1/16″
• 4 1/4″ x 5 1/2″

Scraps of cardstock and DSP for stamping, die cutting and punching.

Watch the video and stamp along with us now!

If you have questions or would like to add any of the products used to your stash please let me know .  I would love to help you!

Stay Safe & Crafty!

This is a simple idea that I think you are going to love and will let you use up some of that Designer Series Paper that I know you are are hoarding! LOL

Let me know if you have questions.  I look forward to “seeing” you on Wednesday night!

Stay Safe & Crafty!

Wednesday, March 25th at 7:00pm

This event will be virtual only, via Zoom.  Be sure to email me at tracie@stampwithtracie.com by 3:00pm on Wednesday, so I can add you to the Zoom email list.  You should receive the email with the link by 5:00pm.  If you do not receive it by then, please text or email me and I will make sure you get it!

Can’t join us on live on Wednesday night, but want to create this fun project?  No, problem!  Visit the Stamp Pad Facebook page or check my blog for the completed project and link to my YouTube channel Thursday afternoon.

Please join me on the Zoom link starting at 6:45pm to chat or ask any questions you may have.  We will begin promptly at 7:00pm. Please remember to keep chatting to a minimum, unless you have a question about the project.  We will have time to chat and ask any non-project questions after we finish.

Here is the scoop on how our Mystery Stamping Parties work. – You will need to gather your supplies and cut your cardstock before the party. There is a list of supplies (some are suggested, so don’t worry if you don’t have everything) and cardstock dimensions below.

During the party I will give you step-by-step directions to make your card along with some tips and tricks. We will NOT share anything about our projects until the very end.

PLEASE note that that I might practice a fancy fold to make sure I understand how it works, but I DO NOT create the full project until I do it with you.  So, it is always a mystery how it will all turn out for me, just like it is for you!

It is always so much fun to see how everyone interprets the directions and with everyone using different stamps, cardstock, DSP, etc.., everyone’s card will be a one of a kind!

Please note that you CAN use anything you have in regards to stamp sets, punches, cardstock, DSP or embellishments. It can be retired if you have something you like and want to use.

Hint, if this is your first time joining us, you might consider prepping two sets of cardstock and DSP.  We lovingly call this “Pulling an Allison.” This ensures that if something goes wrong or you decide  you don’t like how something goes together you can easily fix it.

Here is a list of suggested tools and supplies you need to get together before the party:

• An Embossing Folder
• Stamp set and dies or punches for decorating your card. Ephemera would work, too!  You may want just a little to add accents.  This project is more about the DSP. =-)
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored or a ruler and pencil
• Paper Trimmer or Snips
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 4 1/4″ x 5 1/2″
• 7 1/2″ x 5″ (this should be neutral or a light color that coordinates with your DSP)
• 3 3/4″ x 5 (this can be neutral or a color that coordinates with your DSP)

Designer Series Paper – these should all be the same pattern:

• 3/4″ x 4″
• 3/4″ x 2 3/4″
• 2 @ 3/4″ x 2

A coordinating DSP pattern:

• 2 @ 1 1/16″ x 1 1/16″
• 4 1/4″ x 5 1/2″

Scraps of cardstock and DSP for stamping, die cutting and punching.

Here is the original suggested supply list and measurements if you missed them:

Here is a list of suggested tools and supplies you need to get together before the party:

• Stamp set and dies or punches for decorating your card. Ephemera would work, too!
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored
• Paper Trimmer (this is a MUST this time!)
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 2 @ 4 1/4″ x 11″
• 3 3/4″ x 5″
• 1 1/2″ x 11″
• 3 1/2″ x 4 3/4″ piece of neutral cardstock

Designer Series Paper

• 4″ x 5″

Scraps of cardstock and DSP for stamping, die cutting and punching.

So grab your supplies and come stamp along with us as we make this oldie, but a goodie, Criss Cross Pocket card!

Thank you for popping by!  If you have questions or need to add any of these awesome projects to your stash, please let me know.  I would love to help you!

Stay Safe & Crafty!

Stay Safe & Crafty!

Wednesday, February 25th at 7:00pm

This event will be virtual only, via Zoom.  Be sure to email me at tracie@stampwithtracie.com by 3:00pm on Wednesday, so I can add you to the Zoom email list.  You should receive the email with the link by 5:00pm.  If you do not receive it by then, please text or email me and I will make sure you get it!

Can’t join us on live on Wednesday night, but want to create this fun project?  No, problem!  Visit the Stamp Pad Facebook page or check my blog for the completed project and link to my YouTube channel Thursday afternoon.

Please join me on the Zoom link starting at 6:45pm to chat or ask any questions you may have.  We will begin promptly at 7:00pm. Please remember to keep chatting to a minimum, unless you have a question about the project.  We will have time to chat and ask any non-project questions after we finish.

Here is the scoop on how our Mystery Stamping Parties work. – You will need to gather your supplies and cut your cardstock before the party. There is a list of supplies (some are suggested, so don’t worry if you don’t have everything) and cardstock dimensions below.

During the party I will give you step-by-step directions to make your card along with some tips and tricks. We will NOT share anything about our projects until the very end.

PLEASE note that that I might practice a fancy fold to make sure I understand how it works, but I DO NOT create the full project until I do it with you.  So, it is always a mystery how it will all turn out for me, just like it is for you!

It is always so much fun to see how everyone interprets the directions and with everyone using different stamps, cardstock, DSP, etc.., everyone’s card will be a one of a kind!

Please note that you CAN use anything you have in regards to stamp sets, punches, cardstock, DSP or embellishments. It can be retired if you have something you like and want to use.

Hint, if this is your first time joining us, you might consider prepping two sets of cardstock and DSP.  We lovingly call this “Pulling an Allison.” This ensures that if something goes wrong or you decide  you don’t like how something goes together you can easily fix it.

Here is a list of suggested tools and supplies you need to get together before the party:

• Stamp set and dies or punches for decorating your card. Ephemera would work, too!
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Simply Scored
• Paper Trimmer (this is a MUST this time!)
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock – these pieces should coordinate, but not be the same color:

• 2 @ 4 1/4″ x 11″
• 3 3/4″ x 5″
• 1 1/2″ x 11″
• 3 1/2″ x 4 3/4″ piece of neutral cardstock

Designer Series Paper

• 4″ x 5″

Scraps of cardstock and DSP for stamping, die cutting and punching.

Click here for the suggested supply list and the card measurements.

Scroll down to see the full video and stamp along with us!

Don’t forget that that there is still time to earn Bonus Days Coupons AND to get both the January AND February Product of the Month!

Please contact me if you have questions or would like to add any of the supplies I used to your stash. I would love to help you!

Stay Safe & Crafty!

I look forward to seeing  you Wednesday night!  Until then stay warn, stay safe and stay crafty!

Wednesday, January 28th at 7:00pm

This event will be virtual only, via Zoom.  Be sure to email me at tracie@stampwithtracie.com by 3:00pm on Wednesday, September 24th, so I can add you to the Zoom email list.  You should receive the email with the link by 5:00pm.  If you do not receive it by then, please text or email me and I will make sure you get it!

Due to Facebook’s new policy of removing Facebook Lives after 30 days, I will no longer go live on Facebook, but will upload the finished video.

Can’t join us on live on Wednesday night, but want to create this fun project?  No, problem!  Visit the Stamp Pad Facebook page or check my blog for the completed project and link to my YouTube channel Thursday afternoon.

Please join me on the Zoom link starting at 6:45pm to chat or ask any questions you may have.  We will begin promptly at 7:00pm. Please remember to keep chatting to a minimum, unless you have a question about the project.  We will have time to chat and ask any non-project questions after we finish.

Here is the scoop on how our Mystery Stamping Parties work. – You will need to gather your supplies and cut your cardstock before the party. There is a list of supplies (some are suggested, so don’t worry if you don’t have everything) and cardstock dimensions below.

During the party I will give you step-by-step directions to make your card along with some tips and tricks. We will NOT share anything about our projects until the very end.

PLEASE note that that I might practice a fancy fold to make sure I understand how it works, but I DO NOT create the full project until I do it with you.  So, it is always a mystery how it will all turn out for me, just like it is for you!

It is always so much fun to see how everyone interprets the directions and with everyone using different stamps, cardstock, DSP, etc.., everyone’s card will be a one of a kind!

Please note that you CAN use anything you have in regards to stamp sets, punches, cardstock, DSP or embellishments. It can be retired if you have something you like and want to use.

Hint, if this is your first time joining us, you might consider prepping two sets of cardstock and DSP.  We lovingly call this “Pulling an Allison.” This ensures that if something goes wrong or you decide  you don’t like how something goes together you can easily fix it.

Here is a list of suggested tools and supplies you need to get together before the party:

• Stamp set and dies or punches for decorating your card. Ephemera would work, too!
• A sentiment stamp set if the stamp set you are using doesn’t have one or the one you want to use
• Stylish Shapes or comparable die set with square and banner dies
• Simply Scored
• Paper Trimmer
• Ink pads that coordinate with your cardstock and DSP
• Ribbon, trim and/or embellishments to add that final touch to your project.
• Silicone Craft Mat
• Bone Folder
• Your favorite basic adhesive, Dimensionals, Glue Dots, Tear & Tape, etc…

You will need the following sizes of cardstock and DSP.  PLEASE cut these in advance:

Cardstock:

• 5 1/2″ x 8 1/2″ and scored at 4 1/4″
• Basic White 4″ x 5  1/4″ for inside if your cardbase is a dark color

Layering pieces that should coordinate, but not be the same:

• 4″ x 5 1/4″
• 3 1/2″ x 3 1/2″
• A scrap for your sentiment

Layering pieces to die cut.  I am using Stylish Shapes, but any square dies will do.  These should also coordinate, but not be the same:

• Cut with second largest square or a 2 1/2″ x 2 1/2″ piece of cardstock
• Cut with second smallest square or a 1 3/4″ x 1 3/4″ piece of cardstock
• Cut with the smallest square or a 1 1/2″ x 1 1/2″ piece of cardstock

Designer Series Paper

• 2 coordinating pieces 3 1/2″ x 3 1/2″

Scraps of cardstock and DSP for stamping, die cutting and punching.